Dr. Peter Andrew Jamieson — Academic in an information evolution

← Back to A Random Number Every Second

testbench.sv

· Download testbench.sv · Download both files (.zip)

`timescale 1ns/1ps
// ECE 287 - Exercise 3 testbench: does "done" happen once a second?
// Paste this into the LEFT pane (testbench.sv) on EDA Playground.
//
// Here "one second" is shrunk to MAX_COUNT = 10 clocks so you can read
// every line of the log.
//
// In EPWave (it opens empty): Get Signals -> scope tb -> select clk, start,
// done; then scope tb.dut -> select count -> Append Selected. Count the clock
// periods between start rising and done rising.
//
// Questions to answer from the log:
//   1. How many clocks after start goes high does done go high?
//   2. While start stays high, does done ever go back to 0?
//   3. For the challenge you need something that happens ONCE EVERY
//      second, over and over. Does this counter do that as written?
//      What would have to change, here or in how you drive start?

module tb;

	localparam MAX_COUNT = 10;

	reg clk = 1'b0;
	reg rst = 1'b0;
	reg start = 1'b0;
	wire done;

	integer cyc;
	integer rises;
	integer falls;
	reg last_done;

	counter_50MHz #(.MAX_COUNT(MAX_COUNT)) dut(.clk(clk), .rst(rst), .start(start), .done(done));

	// From Exercises 1 and 2, not instantiated here. design.sv still has both
	// modules; the instances stay commented out until the challenge.
	// lfsr dut_lfsr(.clk(clk), .rst(rst), .seed(seed), .en_seed(en_seed), .number(number));
	// seven_segment dut_seg(.i(i), .o(o));

	always #10 clk = ~clk;   // 50 MHz

	initial
	begin
		$dumpfile("dump.vcd");
		$dumpvars(0, tb);

		repeat (3) @(posedge clk);
		#1 rst = 1'b1;
		repeat (3) @(posedge clk);
		#1 start = 1'b1;

		rises = 0;
		falls = 0;
		last_done = done;

		$display("start went high. MAX_COUNT = %0d", MAX_COUNT);
		$display(" clock | count | done");
		for (cyc = 1; cyc <= 4 * MAX_COUNT; cyc = cyc + 1)
		begin
			@(posedge clk);
			#1;
			$display("  %3d  |  %3d  |  %b", cyc, dut.count, done);
			if (done == 1'b1 && last_done == 1'b0) rises = rises + 1;
			if (done == 1'b0 && last_done == 1'b1) falls = falls + 1;
			last_done = done;
		end

		$display("");
		$display("In %0d clocks (about %0d 'seconds'), done went 0->1 %0d time(s) and 1->0 %0d time(s).",
		         4 * MAX_COUNT, 4, rises, falls);
		$finish;
	end

endmodule