← Back to A Random Number Every Second
testbench.sv
· Download testbench.sv · Download both files (.zip)
`timescale 1ns/1ps
// ECE 287 - Exercise 2 testbench: draw every digit the decoder makes.
// Paste this into the LEFT pane (testbench.sv) on EDA Playground.
//
// The log draws each output as a little seven-segment picture.
// Questions to answer from the log:
// 1. A segment is drawn when its bit is 0, not 1. Why would the board
// be wired that way? (Look up "active low".)
// 2. Do all 16 pictures look like the digit they should be?
// 3. Our random number is 8 bits. How many of these decoders will you
// need to show it in decimal, and what values will each one see?
//
// In EPWave (it opens empty): Get Signals -> scope tb -> select i and o ->
// Append Selected. There is no clock here. When does o change compared with i?
module tb;
reg [3:0] i;
wire [6:0] o;
integer k;
// one row of a seven-segment digit as 3 characters of ASCII art.
// The segments are active low: a 0 bit draws, a 1 bit is blank.
// row 0: _ segment 0
// row 1: |_| segments 5, 6, 1
// row 2: |_| segments 4, 3, 2
function [23:0] seg_row(input [6:0] s, input [1:0] row);
case (row)
2'd0: seg_row = {" ", (s[0] ? " " : "_"), " "};
2'd1: seg_row = {(s[5] ? " " : "|"), (s[6] ? " " : "_"), (s[1] ? " " : "|")};
2'd2: seg_row = {(s[4] ? " " : "|"), (s[3] ? " " : "_"), (s[2] ? " " : "|")};
default: seg_row = " ";
endcase
endfunction
seven_segment dut(.i(i), .o(o));
// From Exercise 1, not instantiated here. design.sv still has the lfsr
// module; the instance stays commented out until the challenge.
// lfsr dut_lfsr(.clk(clk), .rst(rst), .seed(seed), .en_seed(en_seed), .number(number));
initial
begin
$dumpfile("dump.vcd");
$dumpvars(0, tb);
for (k = 0; k < 16; k = k + 1)
begin
i = k;
#10;
$display("input %h -> o = %b (segments 6543210)", i, o);
$display(" %s", seg_row(o, 2'd0));
$display(" %s", seg_row(o, 2'd1));
$display(" %s", seg_row(o, 2'd2));
$display("");
end
$finish;
end
endmodule